Validation of the adjusted strength criterion LaRC04 for uni-directional composite under combination of tension and pressure

Authors

  • Jan Krystek Faculty of Applied Sciences, University of West Bohemia
  • Radek Kottner Faculty of Applied Sciences, University of West Bohemia
  • Lukáš Bek Faculty of Applied Sciences, University of West Bohemia
  • Vladislav Laš Faculty of Applied Sciences, University of West Bohemia

Keywords:

composite, criterion, LaRC04, combination of tension and compression

Abstract

Strength of unidirectional composite materials for some combinations of state of stress cannot be successsfully predicted even with modern failure criteria. In case of the combination of compression in the transverse direction and tension in the fiber direction, the criterion LaRC04 was adjusted in previous work. The predicted strengths in this case reach significantly larger values compared to the ultimate strengths of the material in the respective directions. The adjusted criterion is able to predict the failure of unidirectional composite in case of the mentioned combination of loading. The validation of the adjusted criterion is carried out by means of the comparison of experimental results and numerical analysis performed in finite element system MSC.Marc.

Downloads

Published

30-Dec-2010

Issue

Vol. 4 No. 2 (2010)

Section

Articles

License

Copyright (c) 2016 Applied and Computational Mechanics

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

“Validation of the adjusted strength criterion LaRC04 for uni-directional composite under combination of tension and pressure” (2010) Applied and Computational Mechanics, 4(2). Available at: https://acm.kme.zcu.cz//article/view/100 (Accessed: 24 May 2025).